ZJT EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate board, and the middle core is filled with polystyrene beads, cement , sand, and ect.
1). Surface: Reinforced calcium silicate board
2).Core: Cement, EPS, sand, Fly ash
2). Thickness: 60/75/90/100/120/150mm
3). Width: 610mm
Floor, Roofing, Wall, Villa, Prefab building, Etc.
Lightweigt, insulation, fireproof, waterproof, moistureproof, and eco-friendly etc.
7-20 days after order confirmed
Put a layer of foam cloth between each panel, use hard paper to protect angles, use roll whole pallet with thin film, OEMis welcome.
Anti-bending damage load/times over deadweight
single point hanging strength
Sound insulation capacity in the air (DB)
Heat transfer coefficient(B/W/M^2.K)
We are manufacturer of EPS Sandwich panel. EPS & Cement sandwich panel are widely applied to interior wall partition,exterior wall and roof for all kind of constructions.
Electrick Circular Machine
Free packing: normal pallet + packing belt Standard exporting packing: good pallet+pearl wool+corner protective paper+packing belt+plastic thin film Loading: Normally 18 pallets per 20' container or according to clients' requirements