Energy-Saving Lightweight EPS Sandwich Panel

Surface: Reinforced calcium silicate board
Core: Cement, EPS, sand, Fly ash

Description

ZJT lightweight energy saving composite eps sandwich cement wall panel is composed of face panel and interior filling. The material of face panel is caIcium siilcate board and the core is composite of sand,cement, eps foam, water, fly ash, t's a new wall panel instead of the traditional bricks during the mordern construction. 

产品信息


Specifications & Dimensions

 



National StandardsTesting Results
S/NItems60mm90mm120mm60mm90mm120mm
1

Anti-impact 

Capacity/times

5

5

5

≥8

≥10

≥15

2Anti-bending damage load/times over deadweight

≥1.5

≥1.5

≥1.5

≥3

≥4

≥5

3Anti-pressure(Mpa) 

≥3.5

≥3.5

≥3.5

≥5

≥5

≥5

4single point hanging strength ≥1000

≥1000

≥1000

≥1200

≥1300

≥1500

5Sound insulation capacity in the air (DB) ≥30

≥35

≥40

≥36

≥40

≥45

6Fireproof limit/h ≥1

≥1

≥1

≥4

≥4

≥4

7Heat transfer coefficient(B/W/M^2.K) //

≤1.0

≤0.1478

≤0.1478≤0.1478

111


Advantages



featuresmore detail
1 green 100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001. 
2lightweight economicThe volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry. 
3increase valid space the thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2  per 11.8mm. in other words, it can increase 6/m2  per 100/m2 . 
 
4moistureproof waterproof will keep dry and leave no stains. During humid days, the boards will not condense water either.  suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof. 
5fireproofFireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard. 
6heat insulationZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.
7sound insulationThe raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB.  
8walls can be nailed and grooved ZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on. 
9good integrationBy using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry. 
10easy and fast construction It can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering.  


Application

1. Floor System
Itcan be innovatively used as floor board.Besides the basic characteristics like sound insulation,waterproof,dampproof,this system has the outstanding advantages such as hight load-bearing capacity, antistatic electricity, friction  resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance,no deformation,no split,etc.,which is much suitable for the fields including the floor plate of additional top floor, factory,workshop,warehouse,etc.

2. Villa&Exterior Wall System
Itcan automatically adjust indoor air and water content with the season and climate changes, which can keep the temperature at an invariable temperature level ,and such ecology effect just goes with the tide of modern residential building. It is widely applied to various modular house ,low buildings, apartment, villas,and city house
3. Interior Partition System
With excellent fireproof, best hanging force, sound insulation, heat insulation, waterproof, 

easy Installation and the like characteristics, light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4.Roof System
This system not only solves the problem of roof leakage,but also has the advantages such as heat insulation, neat joint surface, high temperature resistance, etc.The features of light weight and hight strength reduce the use of roof beamcolumn,reduce the consumption of materials,improve security;its easy construction time,which bring out its hight integrated performance-price ratio.


Installation

Alignment:making the base line of the installation position of the wallboard.
       
Sawing of wallboard:cutting and adjusting the width and length of wallboard on the basis of the requirement.
       
Sizing: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.
       
Fitting the sheet: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.
       
Placing the wallboard: filling the vacant position of the wall 
       
Adjustment: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.
       ↓ 
Filling joints: clear away the facial panel  cement mortar and press it tightly with round steel bar.
       
Installation of crack-resistant material: after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.
       
Insertion of wires: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.
       
Plastering paint: to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.


Packaging & Delivery

1.Free packing (with normal pallet and packing belt) 
2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): 
USD20-30/Package 
3.Packing size: 2270/2440*610*60/75/90/100/120/150 mm 
4.Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container 
Delivery Detail: about 10 days after payment

Packing


222


Xiamen ZhongJingtai Building Materials Co., Ltd, a professional high-tech research and development company specializes in producing new energy-saving wall materials, machinery and equipment development, technology production and promotion of product applications. Our company is situated in the charming city---Xiamen, with convenience of water and land transportation and only 15 minutes from the airport. We focus on persuing to the environmental and energy-saving modern wall materials and also positively respond to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. In addition, We can produce more than 2 million square meters of various wall materials annually. Quality fisrt, honesty and  win-win cooperation are our management ideas.

Our company relying on the advanced equipment, first-class technology, excellent quality, strong productivity, favorable customer service system, has set up the good brand image in the market and been widely recognized by many other countries.If applied it on your buildings, it will improve your work effeciency,  promote your work environment, save your work time, save your living space and be convenient for the late maintenance. We have been taking part in the trade shows in home and abroad and getting more  cooperations and recognizations with foreign customers. 








Hot Tags: energy-saving lightweight eps sandwich panel, suppliers, manufacturers, factory, price

Feedback

Related Products

Products List