Introduction of Lightweight Panels Advantages of Lightweight Panels Application of Lightweight Panels It can be used as both interior and exterior partition walls or all kinds of decoration and building construction, and also the best materials for plants, apartments, hotels, office buildings...
Lightweight Panels for Interior Wall
5mm Calcium silicate board (face board) + EPS/Cement/Sand(core material) + 5mm Calcium silicate board (face board)
lightweight, insulation, fireproof, waterproof, fast installation, and environmental etc
Floor, Roofing, Wall, Villa, Prefabricate house, Building, School, Hotel...
Length Width Thickness
Packaging & Shipping
Packed with plastic film, protected by belt and place in pallet
Free sample, shipping charge by customers.
SGS, TUV, Fire insulation certificate, Sound transmission loss certificate...
Advantages of Lightweight Panels
100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001.
The volume-weight only 750-800kg/m3, the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry.
Increase valid space
the thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards. Thus, valid space increases 1/m2 per 11.8mm. in other words, it can increase 6/m2 per 100/m2 .
Moisture proof Waterproof
will keep dry and leave no stains. During humid days, the boards will not condense water either. suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.
Fireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree. The nonflammable performance reaches national A-class standard.
ZJT board is composed of special material to keep heat and thermal within a favorable condition. At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.
The raw materials of ZJT boards have good performance in sound insulation. ZJT board with 90mm thickness gains sound insulation of 42dB.
Walls can be nailed and grooved
ZJT board can be grooved to have conductor arrangement or nailed to hang heavy object. The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on.
By using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry.
Easy and fast construction
It can be cut to adjust length and width at will. The process of installation is easy and fast, without the need of plastering.
Lightweight panels for interior wall can be used as both interior and exterior partition walls or all kinds of decoration and building construction, and also the best materials for plants, apartments, hotels, office buildings and public constructions, etc.
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens. in the high-rise building and housing renovation projects.
Exterior wall/ Floor
Certificate of Lightweight Panels
--Hanging nail force
--Fire resistance tests
--Sound transmission loss