We are professional manufacturer of Walk-in cold rooms for the food processing industry, refrigerated warehouses, commercial cold rooms, industrial refrigeration and marine refrigeration. After more than ten years development ever since 2001, there is 180 staff now, including 28 technicians. Our...
We are professional manufacturer of Walk-in cold rooms for the food processing industry, refrigerated warehouses, commercial cold rooms, industrial refrigeration and marine refrigeration. After more than ten years development ever since 2001, there is 180 staff now, including 28 technicians.
Our annual output of computer cut PU insulation boards can reach 350,000 square meters, which use polyurethane as the core material, color painted steel sheet, stainless steel sheet, or embossed aluminum sheet as the surface. competitive price, and good service, our products have already been exported to Middle East, Canada, Australia, Saudi Arabia, etc.
Specification of Polyurethane Insulated Panel
Width: Standard width 960mm, or customized, maximam 1200mm
Length: as per customers' needs, maximam 12000mm
Thickness: 50mm, for cold room, above 10°C
75mm, for cold room, above 0°
100mm, for freezer room, -10~ -18 °C
120mm, for blast freezer, -18~ -20°C
150mm, for blast freezer, -20~ -25°C
200mm, for blast freezer, -25~ -30°C
The most suitbale thickness will be suggested according to the size and temperature requirements.
Surface metal: 0.3~0.8mm Color steel (Pre-painted galvanized iron steel) sheet/Stainless steel sheet/ aluminum sheet
PU density: 38~42kg/m3
Hard board around the corners, covered with plastic film, in order to avoid any possible scratches during the transportation
1, First of all, it must carry on the construction preparation before installation, include personnel, materials, etc. All will be well prepared.
2, Before the installation of polyurethane wall panel, it should check whether the verticality and levelness of metope purlin installation requirements, wall frame column vertical degree meets the requirement.
3, Before installation polyurethane wall panel, it should first mounting plate bottom water retaining plate and the bottom of the window to block water board, water retaining plate and wall frame beam connection with self tapping screw fixation.
4, Polyurethane wall panel links with ground.
Lateral links: fixed polyurethane sandwich panel with the ground at the other end of the round hole with steel frame fixed, connection between the two plate mouth involution, if occurrence crack of the connectors available heat preservation to fill.
Vertical links: the gap between plates, using the dedicated button concave groove in the fixed polyurethane wall panel.
We can provide many cold room products, such as PU sandwich panels, swing doors, sliding doors, refrigeration units, evaporators, controllers, lights, and other accessories.